GEOSYNTHETICS · TECHNICAL NONWOVENS
Geosynthetics & Engineering Materials

Staple-Fiber Needle-Punched Geotextile

Review staple-fiber needle-punched geotextile for separation, filtration and protection layers. Compare soil retention, water transmission and installation resistance before choosing a mass or tensile class.

Part of Needle-Punched Geotextiles

Staple-Fiber Needle-Punched Geotextile — reference image from the supplied product literature

Supplied brochure image. Material / use reference; confirm the offered configuration.

Specification & selection inputs
ConstructionPET or PP staple fibers forming a porous mechanically interlocked web
Supply / processOpening, carding, web formation and repeated needle punching
Intended usesRoad separation, drainage filtration, slope filters and protection layers
Commercial modelNot established in the supplied literature; confirm the offered grade
Data statusBrochure references; not guaranteed values or batch test results

Catalogue references are not guaranteed performance values. Confirm the offered grade, test methods and supply responsibilities in the quotation.

Product type / configuration, not an approved commercial model code. Confirm the offered identifier and specification before ordering.

Supplier literature: specification inputs

These are stated brochure ranges for preliminary review, not a guaranteed combination or an approved commercial model. Confirm the selected construction, tolerances, test method and acceptance criteria.

Property / configurationLiterature reference
Mass100–800 g/m²
Thickness1.0–8.0 mm reference
Nominal tensile classes3 / 5 / 8 / 10 / 15 / 20 / 25 / 30 / 40 kN/m; reference classes, not BOSHIDA model codes
O90 (O95 notation in source)0.07–0.20 mm; method to confirm
Width1–6 m on P4; 1–7 m on P5 — confirm offered width
Roll length50–200 m reference

Short-fiber reference classes in

Transcribed brochure reference classes. No mass-to-class equivalence or enterprise model approval is implied. The final TDS and test result govern the offered product.

Nominal tensile class (kN/m)Tensile ≥ (kN/m)CBR ≥ (kN)Tear MD/CD ≥ (kN)
330.60.1
5510.15
881.40.2
10101.80.25
15152.50.4
20203.20.5
252540.65
30305.50.8
404071.0

Material and construction

PET or PP staple fibers forming a porous mechanically interlocked web.

The material is selected for road separation, drainage filtration, slope filters and protection layers. Define the component or system position first, then use the selection and evidence requirements on this page to prepare a comparable enquiry.

Applications and material position

Road separation, drainage filtration, slope filters and protection layers.

Locate the textile in the road, drain, slope or membrane section. Decide which property protects the system at that position: retention of fines, water passage, separation or resistance to contact damage.

What changes the selection

Compare the offered PET or PP construction against the specified opening-size and mechanical tests. Confirm notation and test method for the reported pore-size figure; reference tensile classes are not automatically matched to every fabric mass.

Processing and supply configuration

Opening, carding, web formation and repeated needle punching.

Agree the supplied format, dimensions, tolerances, identification and packaging around the actual converting or installation sequence. Use a representative sample to confirm the proposed construction before recording it as the accepted material for the order.

Reference dimensions and configuration

The supplied literature provides the following preliminary inputs: Mass: 100–800 g/m²; Thickness: 1.0–8.0 mm reference; Nominal tensile classes: 3 / 5 / 8 / 10 / 15 / 20 / 25 / 30 / 40 kN/m; reference classes, not BOSHIDA model codes; O90 (O95 notation in source): 0.07–0.20 mm; method to confirm; Width: 1–6 m on P4; 1–7 m on P5 — confirm offered width; Roll length: 50–200 m reference.

Confirm the offered construction and applicable range before ordering. These entries are not a promise that every listed value can be supplied together.

Performance review and acceptance

Tensile class and direction, CBR puncture, tear, opening size, permeability and tolerances. Request the applicable method, specimen direction, conditioning and test scope. A published reference range is different from a measured sample result.

Keep the proposed material identifier, specimen preparation and acceptance basis with the result so that procurement can compare like with like.

Applicability and limitations

Source standard tables are reference information, not the actual results of every mass or fiber blend. Opening-size notations and test methods must be agreed. Do not combine all maxima into a single product.

Sampling and procurement brief

Include the following in your enquiry: soil and water conditions; layer drawing; PET or PP requirement; opening-size method; flow requirement; puncture or tensile targets; roll dimensions.

Start with the conditions you know; mark the unknown values for review. Use the related application and product-type links on this page to refine the requirement, then send a material-specific brief. Sample approval, packing, available supply format, quantity and delivery timing are confirmed for the proposed order.

Language-version differences to confirm

The Chinese packaging page states a mass range up to 1000 g/m², while the English brochure states up to 800 g/m². The supplied standards list also contains a Chinese/English description mismatch. Confirm the effective specification and test designation before purchase.

Source & applicability

Supplier literature supports this selection brief. Reference ranges do not establish an approved grade, certification or tested system performance.

Commercial grade & specification

This page describes a material family or construction type. The offered commercial model and applicable specification are confirmed for the proposed order.

Prepare the grade requirements ↗

Technical documents

Review the selection checklist or request documents for the proposed grade. Public checklists are not test reports.

View selection checklist ↗ Find related documents ↗
TECHNICAL RESOURCES

Before you buy

01 / BUYING GUIDE
Technical resources

PET or PP Geotextile: Define the Environment Before the Polymer

Choose PET or PP geotextile against the contact environment and the required function, not the polymer name alone. PET means polyester and PP means polypropylene. Neither label identifies the complete finished-fabric specification. For a purchasing decision, separate the chemistry question from hydraulic and mechanical qualification: a material considered suitable for the exposure still needs evidence for its separation, filtration or protection duty.

Explore
02 / BUYING GUIDE
Technical resources

Staple Fiber or Continuous Filament: Compare the Actual Specification

Choose staple-fibre or continuous-filament needle-punched geotextile by comparing the offered constructions against the project duty. Staple fibres form one type of entangled web; continuous filaments form another. Those names describe construction, not a universal ranking in strength, filtration performance or long-term suitability.

Explore
03 / BUYING GUIDE
Technical resources

Reading a Geotextile Table: Strength, Puncture, Opening Size and Flow

Read a geotextile table as a set of separate answers: mass and thickness describe aspects of construction; tensile and puncture address different mechanical questions; opening size and flow data address different hydraulic questions. A purchasing decision should match each required property to its method, units, value basis and offered grade. A single mass or strength number cannot replace that schedule.

Explore
04 / BUYING GUIDE
Technical resources

Protecting a Geomembrane: Below, Above or Both Sides

Identify the contact being protected before deciding whether a geomembrane needs geotextile below, above or on both sides. A lower layer and an upper layer can address different damage exposures. Their positions, constructions and acceptance basis should follow the lining-system design; fabric weight alone cannot approve the protection arrangement.

Explore
05 / BUYING GUIDE
Technical resources

A Sample Test Report Is Different from a Brochure Range

A sample test report describes the specimen and tests identified in that report. A brochure describes a product family or claimed capability. Procurement needs both context and traceability: identify what was tested, what is being offered and which project requirements the evidence actually answers. Neither a laboratory logo nor a strong result fills in missing scope.

Explore
INDUSTRY ROUTESTransport & Civil Infrastructure ↗Water, Land & Environmental Systems ↗