GEOSYNTHETICS · TECHNICAL NONWOVENS
Industrial Needle-Punched Nonwovens

Spring Pocket Fabric

Develop spring-pocket fabric around the spring size and joining process. Evaluate material feeding, thermal or ultrasonic seams and assembly cycling before confirming the production specification.

Part of Furniture & Upholstery Nonwovens

Spring Pocket Fabric — reference image from the supplied product literature

Supplied brochure image. Material / use reference; confirm the offered configuration.

Specification & selection inputs
ConstructionPET or PP needle-punched nonwoven intended for individual spring wrapping
Supply / processHeat-set fabric evaluated for thermal or ultrasonic seam formation
Intended usesPocket spring mattresses and spring assemblies in upholstered furniture
Commercial modelNot established in the supplied literature; confirm the offered grade
Data statusBrochure references; not guaranteed values or batch test results

Catalogue references are not guaranteed performance values. Confirm the offered grade, test methods and supply responsibilities in the quotation.

Product type / configuration, not an approved commercial model code. Confirm the offered identifier and specification before ordering.

Supplier literature: specification inputs

These are stated brochure ranges for preliminary review, not a guaranteed combination or an approved commercial model. Confirm the selected construction, tolerances, test method and acceptance criteria.

Property / configurationLiterature reference
Mass50–400 g/m²
Width0.3–2.5 m
Air permeability reference200–400 L/m²·s
Tensile reference≥100 N/5 cm
Heat-sealing reference150–190 °C; machine and blend dependent

Material and construction

PET or PP needle-punched nonwoven intended for individual spring wrapping.

The material is selected for pocket spring mattresses and spring assemblies in upholstered furniture. Define the component or system position first, then use the selection and evidence requirements on this page to prepare a comparable enquiry.

Applications and material position

Pocket spring mattresses and spring assemblies in upholstered furniture.

Describe the individual spring pocket and the assembly sequence. Fabric width, seam location and the behavior of the chosen PET or PP construction must suit the equipment and spring geometry.

What changes the selection

Run a controlled joining and assembly trial. Record machine settings and inspect the seam and material after the agreed compression cycle; a brochure temperature range is not a ready-made machine recipe.

Processing and supply configuration

Heat-set fabric evaluated for thermal or ultrasonic seam formation.

Agree the supplied format, dimensions, tolerances, identification and packaging around the actual converting or installation sequence. Use a representative sample to confirm the proposed construction before recording it as the accepted material for the order.

Reference dimensions and configuration

The supplied literature provides the following preliminary inputs: Mass: 50–400 g/m²; Width: 0.3–2.5 m; Air permeability reference: 200–400 L/m²·s; Tensile reference: ≥100 N/5 cm; Heat-sealing reference: 150–190 °C; machine and blend dependent.

Confirm the offered construction and applicable range before ordering. These entries are not a promise that every listed value can be supplied together.

Performance review and acceptance

Seam strength, fabric tensile/abrasion, feed behavior and compression-cycle performance. Request the applicable method, specimen direction, conditioning and test scope. A published reference range is different from a measured sample result.

Keep the proposed material identifier, specimen preparation and acceptance basis with the result so that procurement can compare like with like.

Applicability and limitations

Do not treat the brochure sealing temperature as a guaranteed machine setting. Quietness, puncture durability and E0 statements require the finished assembly and appropriate test evidence.

Sampling and procurement brief

Include the following in your enquiry: spring dimensions; pocket geometry; fabric feed width; thermal or ultrasonic process; seam criteria; compression cycling; ventilation requirement.

Start with the conditions you know; mark the unknown values for review. Use the related application and product-type links on this page to refine the requirement, then send a material-specific brief. Sample approval, packing, available supply format, quantity and delivery timing are confirmed for the proposed order.

Source & applicability

Supplier literature supports this selection brief. Reference ranges do not establish an approved grade, certification or tested system performance.

Commercial grade & specification

This page describes a material family or construction type. The offered commercial model and applicable specification are confirmed for the proposed order.

Prepare the grade requirements ↗

Technical documents

Review the selection checklist or request documents for the proposed grade. Public checklists are not test reports.

View selection checklist ↗ Find related documents ↗
INDUSTRY ROUTESFurniture & Bedding ↗