Furniture & Upholstery Nonwovens
Choose furniture nonwovens by component duty: rigid support, bottom covering or spring separation. Compare hardfelt, base fabric and spring-pocket fabric before agreeing the material specification.
Choose within Furniture & Upholstery Nonwovens.
Compare construction and intended position first, then open the individual type for its reference parameters, sources, limitations and procurement questions. Product types are not approved commercial model codes.

Furniture Hardfelt
Review needle-punched hardfelt for furniture support panels and linings. Match thickness and stiffness to bending, frame contact, fixing and lamination requirements in the intended component.
Explore
Furniture Base Fabric
Select furniture base fabric for sofa undersides, dust covers and mattress linings. Compare coverage, airflow, handling and attachment requirements before choosing roll dimensions and construction.
Explore
Spring Pocket Fabric
Develop spring-pocket fabric around the spring size and joining process. Evaluate material feeding, thermal or ultrasonic seams and assembly cycling before confirming the production specification.
Explore| Product type | Construction | Intended use | What changes the selection | Next step |
|---|---|---|---|---|
| Furniture Hardfelt | PET or blended needle-punched fibers with a stiffened supporting structure | Sofa back panels, headboards, seat-frame linings and upholstery support | Cut and fit a representative sample to the frame or laminate. Compare bending behavior, fixing integrity and the specified mechanical tests under the same conditioning. | Prepare this type’s brief ↗ |
| Furniture Base Fabric | PET or PP needle-punched and heat-set nonwoven base fabric | Sofa bottom covers, mattress base linings, seat dust covers and support linings | Try the fabric on the actual frame or base. Review cutting, fixing, tear behavior and any required airflow using the relevant method rather than relying on a tensile figure alone. | Prepare this type’s brief ↗ |
| Spring Pocket Fabric | PET or PP needle-punched nonwoven intended for individual spring wrapping | Pocket spring mattresses and spring assemblies in upholstered furniture | Run a controlled joining and assembly trial. Record machine settings and inspect the seam and material after the agreed compression cycle; a brochure temperature range is not a ready-made machine recipe. | Prepare this type’s brief ↗ |
Comparison content is derived from the linked product records. No combined maximum specification or automatic interchangeability is implied.

Supplied brochure image. Material / use reference; confirm the offered configuration.
| Construction | Needle-punched fabrics for support, dust-cover and spring-pocket duties |
|---|---|
| Supply / process | Heat-set or impregnated structures selected for different furniture components |
| Intended uses | Sofa and bed structures, bottom covers, mattress spring units and upholstered furniture |
| Commercial model | Not established in the supplied literature; confirm the offered grade |
| Data status | Brochure references; not guaranteed values or batch test results |
Catalogue references are not guaranteed performance values. Confirm the offered grade, test methods and supply responsibilities in the quotation.
Supplier literature: specification inputs
These are stated brochure ranges for preliminary review, not a guaranteed combination or an approved commercial model. Confirm the selected construction, tolerances, test method and acceptance criteria.
| Property / configuration | Literature reference |
|---|---|
| Product routes | Furniture hardfelt / base fabric / spring pocket fabric |
| Selection basis | Structural duty, joining method and finished assembly |
| Supply | Roll or converted format subject to the selected product |
Material and construction
Needle-punched fabrics for support, dust-cover and spring-pocket duties.
The material is selected for sofa and bed structures, bottom covers, mattress spring units and upholstered furniture. Define the component or system position first, then use the selection and evidence requirements on this page to prepare a comparable enquiry.
Applications and material position
Sofa and bed structures, bottom covers, mattress spring units and upholstered furniture.
Start with the furniture component, not a generic fabric weight. A shaped support panel, breathable dust cover and sealed spring pocket perform different tasks and require different construction and joining decisions.
What changes the selection
Review samples in the intended frame, cover or spring assembly. Specify how the material is cut, fixed, sealed or laminated, and assess that operation before transferring an order to a larger quantity.
Processing and supply configuration
Heat-set or impregnated structures selected for different furniture components.
Agree the supplied format, dimensions, tolerances, identification and packaging around the actual converting or installation sequence. Use a representative sample to confirm the proposed construction before recording it as the accepted material for the order.
Reference dimensions and configuration
The supplied literature provides the following preliminary inputs: Product routes: Furniture hardfelt / base fabric / spring pocket fabric; Selection basis: Structural duty, joining method and finished assembly; Supply: Roll or converted format subject to the selected product.
Confirm the offered construction and applicable range before ordering. These entries are not a promise that every listed value can be supplied together.
Performance review and acceptance
Component-specific mechanical tests, dimensional stability, joining compatibility and requested chemical/emission evidence. Request the applicable method, specimen direction, conditioning and test scope. A published reference range is different from a measured sample result.
Keep the proposed material identifier, specimen preparation and acceptance basis with the result so that procurement can compare like with like.
Applicability and limitations
These three products are not interchangeable. Brochure E0/formaldehyde-free, fatigue and sealing claims need the correct product-specific method and evidence.
Sampling and procurement brief
Include the following in your enquiry: furniture component; support or cover duty; dimensions; joining method; appearance and airflow; assembly tests; roll or converted format.
Start with the conditions you know; mark the unknown values for review. Use the related application and product-type links on this page to refine the requirement, then send a material-specific brief. Sample approval, packing, available supply format, quantity and delivery timing are confirmed for the proposed order.
Source & applicability
Supplier literature supports this selection brief. Reference ranges do not establish an approved grade, certification or tested system performance.
Commercial grade & specification
This page describes a material family or construction type. The offered commercial model and applicable specification are confirmed for the proposed order.
Prepare the grade requirements ↗Technical documents
Review the selection checklist or request documents for the proposed grade. Public checklists are not test reports.
View selection checklist ↗ Find related documents ↗Explore related applications
Before you buy
OEM Sampling: From a Traceable Brief to an Approved Specification
An OEM nonwoven sample is useful when it represents a defined component and a decision the buyer needs to make. OEM means original equipment manufacturer. Start a development request with the finished use and converting process, then identify the candidate sample and the evidence required to move it forward. Sending an unlabelled swatch without that context rarely creates a comparable approval record.
ExploreFurniture Hardfelt, Base Fabric or Spring Pocket Fabric?
Choose furniture hardfelt, base fabric or spring-pocket fabric by the component’s job, not by applying one fabric weight across the furniture. The supplied literature describes different material routes for stiffer support, bottom-cover or support duties, and wrapping individual springs. Each route needs its own assembly and evidence questions.
ExplorePocket-Spring Fabric: What Must Be Agreed Before an Ultrasonic Line Trial?
For a pocket-spring ultrasonic trial, give the longitudinal seam and transverse closure separate entries on the result sheet. Record which of these positions was actually tested and leave the other undecided until it has been reviewed. This proposed record helps a mattress manufacturer define the scope of a seam decision; it supplies no welding settings or pass limits.
Explore

