Industrial Filtration & Custom Felts
Define the air, dust or liquid filtration task before choosing needle-punched media. Compare the challenge material, flow, pressure drop and compatibility requirements of the proposed construction.
Choose within Industrial Filtration & Custom Felts.
Compare construction and intended position first, then open the individual type for its reference parameters, sources, limitations and procurement questions. Product types are not approved commercial model codes.

Air Filter Cotton
Review needle-punched media for HVAC and air pre-filtration development. Define particle challenge, airflow, pressure drop and filter support before requesting a construction or performance class.
Explore
Industrial Dust Filter Felt
Develop dust-filter felt around the dust, temperature, flow and cleaning conditions. Compare the proposed needle-punched construction with the filter support and application-specific acceptance tests.
Explore
Liquid Filtration Base Fabric
Review nonwoven base fabric for liquid pre-filtration. Define the liquid, viscosity, temperature, retention target and pressure conditions before comparing the proposed media construction.
Explore| Product type | Construction | Intended use | What changes the selection | Next step |
|---|---|---|---|---|
| Air Filter Cotton | Application-selected polyester-based needle-punched filter medium | HVAC pre-filtration, ventilation and selected automotive air systems | Test the proposed medium or assembly at the specified flow and particle challenge. A family airflow value without test pressure is not a complete pressure-drop curve or proof of a filter classification. | Prepare this type’s brief ↗ |
| Industrial Dust Filter Felt | Application-selected polyester-based needle-punched filter medium | Industrial dust collection and ventilation media development | Review a representative media or filter trial under the intended challenge and cleaning regime. Do not infer antistatic, high-temperature or explosive-dust suitability from a generic treatment description. | Prepare this type’s brief ↗ |
| Liquid Filtration Base Fabric | Application-selected polyester-based needle-punched filter medium | Water, oil or chemical pre-filtration where the selected material is compatible | Evaluate representative flow, retention and compatibility under the intended conditions. Airflow or air-filter classification data cannot supply a liquid micron rating or prove chemical compatibility. | Prepare this type’s brief ↗ |
Comparison content is derived from the linked product records. No combined maximum specification or automatic interchangeability is implied.

Supplied brochure image. Material / use reference; confirm the offered configuration.
| Construction | Polyester-based needle-punched media with application-specific pore structure |
|---|---|
| Supply / process | Multilayer cross-lapping, needle punching and heat setting |
| Intended uses | Air filtration, industrial dust collection and liquid pre-filtration |
| Commercial model | Not established in the supplied literature; confirm the offered grade |
| Data status | Brochure references; not guaranteed values or batch test results |
Catalogue references are not guaranteed performance values. Confirm the offered grade, test methods and supply responsibilities in the quotation.
Supplier literature: specification inputs
These are stated brochure ranges for preliminary review, not a guaranteed combination or an approved commercial model. Confirm the selected construction, tolerances, test method and acceptance criteria.
| Property / configuration | Literature reference |
|---|---|
| Mass | 50–600 g/m² |
| Thickness | 1.0–5.0 mm |
| Width | Up to 3.5 m |
| Airflow reference | 1500–6000 L/m²·s; test pressure not stated |
| Grade reference | Brochure G3–F8 / EN779 statement; no corresponding report supplied |
Material and construction
Polyester-based needle-punched media with application-specific pore structure.
The material is selected for air filtration, industrial dust collection and liquid pre-filtration. Define the component or system position first, then use the selection and evidence requirements on this page to prepare a comparable enquiry.
Applications and material position
Air filtration, industrial dust collection and liquid pre-filtration.
Identify the medium and operating conditions first. Air pre-filtration, dust collection and liquid pre-filtration should not share a grade merely because the fabrics have similar mass or appearance.
What changes the selection
Request a trial or test representative of the specified flow and particle challenge. Record the specimen or filter assembly used; an airflow reference without test pressure cannot establish the pressure drop or efficiency of the finished filter.
Processing and supply configuration
Multilayer cross-lapping, needle punching and heat setting.
Agree the supplied format, dimensions, tolerances, identification and packaging around the actual converting or installation sequence. Use a representative sample to confirm the proposed construction before recording it as the accepted material for the order.
Reference dimensions and configuration
The supplied literature provides the following preliminary inputs: Mass: 50–600 g/m²; Thickness: 1.0–5.0 mm; Width: Up to 3.5 m; Airflow reference: 1500–6000 L/m²·s; test pressure not stated; Grade reference: Brochure G3–F8 / EN779 statement; no corresponding report supplied.
Confirm the offered construction and applicable range before ordering. These entries are not a promise that every listed value can be supplied together.
Performance review and acceptance
Efficiency, resistance and loading for air; retention, flux and compatibility for liquids. Request the applicable method, specimen direction, conditioning and test scope. A published reference range is different from a measured sample result.
Keep the proposed material identifier, specimen preparation and acceptance basis with the result so that procurement can compare like with like.
Applicability and limitations
No pressure-drop curve, efficiency curve or grade certificate is included. Air and liquid ratings are not interchangeable. Confirm the applicable test basis for the purchasing market rather than converting legacy grades by assumption.
Sampling and procurement brief
Include the following in your enquiry: air or liquid medium; particle challenge; flow or face velocity; pressure limits; temperature; cleaning method; support and converting requirements.
Start with the conditions you know; mark the unknown values for review. Use the related application and product-type links on this page to refine the requirement, then send a material-specific brief. Sample approval, packing, available supply format, quantity and delivery timing are confirmed for the proposed order.
Source & applicability
Supplier literature supports this selection brief. Reference ranges do not establish an approved grade, certification or tested system performance.
Commercial grade & specification
This page describes a material family or construction type. The offered commercial model and applicable specification are confirmed for the proposed order.
Prepare the grade requirements ↗Technical documents
Review the selection checklist or request documents for the proposed grade. Public checklists are not test reports.
View selection checklist ↗ Find related documents ↗Explore related applications

Industrial Filtration Media Development
Define the medium and operating conditions before selecting pore structure and material.
Explore
HVAC & Air Pre-Filtration
Review capture, flow resistance and dust loading using the same operating basis.
Explore
Liquid Pre-Filtration
Review material compatibility and retention for the actual liquid.
ExploreBefore you buy
OEM Sampling: From a Traceable Brief to an Approved Specification
An OEM nonwoven sample is useful when it represents a defined component and a decision the buyer needs to make. OEM means original equipment manufacturer. Start a development request with the finished use and converting process, then identify the candidate sample and the evidence required to move it forward. Sending an unlabelled swatch without that context rarely creates a comparable approval record.
ExploreAir and Liquid Filter Media Need Different Specifications
Air and liquid filtration enquiries need different operating descriptions and performance evidence. Air permeability, particle-removal efficiency and a liquid retention claim are not interchangeable quantities. Begin with the medium and duty, then identify the test object, flow conditions and acceptance question for the material or finished filter being purchased.
ExploreAir Filter Support Layer vs Filtration Layer: What Are You Buying?
Specify the layer being purchased before asking for a price. In a multilayer air-filter construction, a support or backing layer and a filtration layer can have different assigned jobs. Mark the requested layer on a stack drawing and state whether the offer covers that layer alone or a supplied combination. The checklist below is an editorial purchasing aid; the buyer’s engineer must confirm the actual construction.
Explore