Liquid Filtration Base Fabric
Review nonwoven base fabric for liquid pre-filtration. Define the liquid, viscosity, temperature, retention target and pressure conditions before comparing the proposed media construction.

Supplied brochure image. Material / use reference; confirm the offered configuration.
| Construction | Application-selected polyester-based needle-punched filter medium |
|---|---|
| Supply / process | Cross-lapped, needle-punched and heat-set structure with project-defined converting |
| Intended uses | Water, oil or chemical pre-filtration where the selected material is compatible |
| Commercial model | Not established in the supplied literature; confirm the offered grade |
| Data status | Brochure references; not guaranteed values or batch test results |
Catalogue references are not guaranteed performance values. Confirm the offered grade, test methods and supply responsibilities in the quotation.
Product type / configuration, not an approved commercial model code. Confirm the offered identifier and specification before ordering.
Supplier literature: specification inputs
These are stated brochure ranges for preliminary review, not a guaranteed combination or an approved commercial model. Confirm the selected construction, tolerances, test method and acceptance criteria.
| Property / configuration | Literature reference |
|---|---|
| Platform reference | 50–600 g/m²; 1–5 mm; width ≤3.5 m — confirm actual medium |
| Functional options | Evaluate flame-retardant, antistatic, antibacterial or oil-repellent options separately |
Material and construction
Application-selected polyester-based needle-punched filter medium.
The material is selected for water, oil or chemical pre-filtration where the selected material is compatible. Define the component or system position first, then use the selection and evidence requirements on this page to prepare a comparable enquiry.
Applications and material position
Water, oil or chemical pre-filtration where the selected material is compatible.
Identify the liquid and the solids to be retained, including relevant chemical and temperature conditions. Clarify how the medium is supported and converted into the filtration assembly.
What changes the selection
Evaluate representative flow, retention and compatibility under the intended conditions. Airflow or air-filter classification data cannot supply a liquid micron rating or prove chemical compatibility.
Processing and supply configuration
Cross-lapped, needle-punched and heat-set structure with project-defined converting.
Agree the supplied format, dimensions, tolerances, identification and packaging around the actual converting or installation sequence. Use a representative sample to confirm the proposed construction before recording it as the accepted material for the order.
Reference dimensions and configuration
The supplied literature provides the following preliminary inputs: Platform reference: 50–600 g/m²; 1–5 mm; width ≤3.5 m — confirm actual medium; Functional options: Evaluate flame-retardant, antistatic, antibacterial or oil-repellent options separately.
Confirm the offered construction and applicable range before ordering. These entries are not a promise that every listed value can be supplied together.
Performance review and acceptance
Material uniformity plus performance tests representative of the specified flow and challenge. Request the applicable method, specimen direction, conditioning and test scope. A published reference range is different from a measured sample result.
Keep the proposed material identifier, specimen preparation and acceptance basis with the result so that procurement can compare like with like.
Applicability and limitations
Airflow and EN779 references cannot be used as a liquid micron rating or universal chemical compatibility.
Sampling and procurement brief
Include the following in your enquiry: liquid composition; viscosity and temperature; solids challenge; retention target; flow; differential pressure; support and converting; compatibility evidence.
Start with the conditions you know; mark the unknown values for review. Use the related application and product-type links on this page to refine the requirement, then send a material-specific brief. Sample approval, packing, available supply format, quantity and delivery timing are confirmed for the proposed order.
Source & applicability
Supplier literature supports this selection brief. Reference ranges do not establish an approved grade, certification or tested system performance.
Commercial grade & specification
This page describes a material family or construction type. The offered commercial model and applicable specification are confirmed for the proposed order.
Prepare the grade requirements ↗Technical documents
Review the selection checklist or request documents for the proposed grade. Public checklists are not test reports.
View selection checklist ↗ Find related documents ↗Explore related applications
Before you buy
OEM Sampling: From a Traceable Brief to an Approved Specification
An OEM nonwoven sample is useful when it represents a defined component and a decision the buyer needs to make. OEM means original equipment manufacturer. Start a development request with the finished use and converting process, then identify the candidate sample and the evidence required to move it forward. Sending an unlabelled swatch without that context rarely creates a comparable approval record.
ExploreAir and Liquid Filter Media Need Different Specifications
Air and liquid filtration enquiries need different operating descriptions and performance evidence. Air permeability, particle-removal efficiency and a liquid retention claim are not interchangeable quantities. Begin with the medium and duty, then identify the test object, flow conditions and acceptance question for the material or finished filter being purchased.
ExploreCompare alternatives in the same series

Air Filter Cotton
Review needle-punched media for HVAC and air pre-filtration development. Define particle challenge, airflow, pressure drop and filter support before requesting a construction or performance class.
Explore
Industrial Dust Filter Felt
Develop dust-filter felt around the dust, temperature, flow and cleaning conditions. Compare the proposed needle-punched construction with the filter support and application-specific acceptance tests.
Explore

