GEOSYNTHETICS · TECHNICAL NONWOVENS
Geosynthetics & Engineering Materials

Composite Geomembranes

Define a composite geomembrane by its membrane and textile layers, not total weight alone. Compare one-fabric and two-fabric structures for the containment and protection requirements of your project.

SERIES → PRODUCT TYPES → TECHNICAL BRIEF

Choose within Composite Geomembranes.

Compare construction and intended position first, then open the individual type for its reference parameters, sources, limitations and procurement questions. Product types are not approved commercial model codes.

Type selection within this series
Product typeConstructionIntended useWhat changes the selectionNext step
One-Fabric Composite GeomembraneOne nonwoven fabric bonded to one side of the membraneProjects requiring the defined one- or two-sided protection configurationReview the proposed edge and overlap detail along with a layer sample. Total mass alone cannot establish how much polymer barrier or textile protection is supplied.Prepare this type’s brief ↗
Two-Fabric Composite GeomembraneOne nonwoven fabric on each side of a central membraneProjects requiring the defined one- or two-sided protection configurationCheck a representative layer sample and the installation section. A second textile does not remove the need for prepared subgrade, controlled cover placement, interface review and seam inspection.Prepare this type’s brief ↗

Comparison content is derived from the linked product records. No combined maximum specification or automatic interchangeability is implied.

Composite Geomembranes — reference image from the supplied product literature

Supplied brochure image. Material / use reference; confirm the offered configuration.

Specification & selection inputs
ConstructionPolymeric membrane bonded with one or two nonwoven geotextile layers
Supply / processOne fabric + one membrane, or two fabrics + one membrane; separate layers may also be specified
Intended usesReservoirs, canals, environmental containment and selected civil waterproofing systems
Commercial modelNot established in the supplied literature; confirm the offered grade
Data statusBrochure references; not guaranteed values or batch test results

Catalogue references are not guaranteed performance values. Confirm the offered grade, test methods and supply responsibilities in the quotation.

Supplier literature: specification inputs

These are stated brochure ranges for preliminary review, not a guaranteed combination or an approved commercial model. Confirm the selected construction, tolerances, test method and acceptance criteria.

Property / configurationLiterature reference
Fabric weight100–600 g/m² per layer, catalog reference
Membrane thickness0.2–1.5 mm, catalog reference
Roll width4.0–6.0 m reference
Roll length50–150 m reference
Structure1T1M / 2T1M; descriptive structure notation, not a commercial model

Material and construction

Polymeric membrane bonded with one or two nonwoven geotextile layers.

The material is selected for reservoirs, canals, environmental containment and selected civil waterproofing systems. Define the component or system position first, then use the selection and evidence requirements on this page to prepare a comparable enquiry.

Applications and material position

Reservoirs, canals, environmental containment and selected civil waterproofing systems.

Separate the liquid-barrier requirement from the protection requirement on each face. A drawing should identify the membrane polymer, membrane thickness, fabric mass per layer and the material touching the exposed faces.

What changes the selection

Review a representative composite sample and the joining detail together. Confirm how membrane edges will be exposed for joining and how the textile is treated at overlaps. Compare layer-specific evidence rather than assuming all composites of the same total mass are equivalent.

Processing and supply configuration

One fabric + one membrane, or two fabrics + one membrane; separate layers may also be specified.

Agree the supplied format, dimensions, tolerances, identification and packaging around the actual converting or installation sequence. Use a representative sample to confirm the proposed construction before recording it as the accepted material for the order.

Reference dimensions and configuration

The supplied literature provides the following preliminary inputs: Fabric weight: 100–600 g/m² per layer, catalog reference; Membrane thickness: 0.2–1.5 mm, catalog reference; Roll width: 4.0–6.0 m reference; Roll length: 50–150 m reference; Structure: 1T1M / 2T1M; descriptive structure notation, not a commercial model.

Confirm the offered construction and applicable range before ordering. These entries are not a promise that every listed value can be supplied together.

Performance review and acceptance

Each layer thickness/mass, tensile, puncture, tear, bond/peel and barrier properties as specified. Request the applicable method, specimen direction, conditioning and test scope. A published reference range is different from a measured sample result.

Keep the proposed material identifier, specimen preparation and acceptance basis with the result so that procurement can compare like with like.

Applicability and limitations

Total composite mass cannot identify membrane thickness or fabric weight. Layer count cannot establish interface stability or protection by itself. Confirm welding edges, exposed faces and joint details.

Sampling and procurement brief

Include the following in your enquiry: 1T1M or 2T1M arrangement; membrane polymer and thickness; each fabric mass; face orientation; joining detail; roll layout; liquid and temperature.

Start with the conditions you know; mark the unknown values for review. Use the related application and product-type links on this page to refine the requirement, then send a material-specific brief. Sample approval, packing, available supply format, quantity and delivery timing are confirmed for the proposed order.

Source & applicability

Supplier literature supports this selection brief. Reference ranges do not establish an approved grade, certification or tested system performance.

Commercial grade & specification

This page describes a material family or construction type. The offered commercial model and applicable specification are confirmed for the proposed order.

Prepare the grade requirements ↗

Technical documents

Review the selection checklist or request documents for the proposed grade. Public checklists are not test reports.

View selection checklist ↗ Find related documents ↗

Technical documents & media

HDPE Geomembranes — English Brochure

Smooth, studded and spray-textured HDPE, dimensions, reference GH tables, protective layers, composite structures, installation and selection FAQ. Illustrative external project images are not BOSHIDA case evidence.

Download technical document (PDF)

View in technical resources
INDUSTRY ROUTESWater, Land & Environmental Systems ↗