Choose thermo-set support fabric or impregnated board by the actual footwear component and required balance of support, flexibility and processing. The supplied footwear literature presents two material routes; it does not establish that their brochure cycle figures are directly comparable or that either route automatically meets a safety-footwear requirement.
Which component and use conditions should be named?
Identify the intended insole, lasting, toe, heel or other support component using the buyer’s drawing and terminology. Describe the shoe type and the support or flexibility the design requires. Record cutting, perforation, bonding or forming operations that the converter expects to perform.
A material described as “midsole” in a supplier document may not identify the buyer’s actual component precisely. Resolve the part position and function before comparing nominal thickness or hardness.
How should samples be evaluated?
Define thickness and mass requirements with tolerances, then identify stiffness, bending, moisture and bonding questions relevant to the component. Ask the laboratory or customer technical contact which methods and specimen conditions apply. Where moisture is relevant, distinguish dry-condition results from the required wet or conditioned assessment.
The trial should identify the base material and any impregnation or bonding system. A finished, treated component can behave differently from an unprocessed sheet; do not erase that distinction in the comparison.
How can brochure durability statements be made useful?
Obtain the full method, sample identity, conditioning and endpoint behind a reported fold or bending count. The two product routes in the supplied literature quote different cycle figures without a complete common basis. Those figures should not be used to declare one universally more durable.
If the customer requires footwear certification or a regulated end-use, identify the actual requirement and the tested component or whole shoe. A material brochure is not the finished-footwear approval.
Example: separate component support from generic hardness
A buyer requests a harder board to solve a shoe-support issue. Clarify the component, bending direction, bonding and use conditions first. A harder sample may answer one support question while leaving flex durability or process compatibility unresolved. This example frames a development decision rather than predicting performance.
Next step
Attach the component drawing and planned process to the footwear substrate enquiry. Use the OEM sampling brief to record the trial scope.
Frequently asked questions (FAQ)
Is impregnated board always the better support material?
Not as a universal rule. Match the required component behaviour and processing route. Greater stiffness alone does not establish a better finished-shoe result.
Can dry test data answer a humid-use requirement?
Only within the scope the customer accepts. Identify whether moisture-conditioned or wet evaluation is needed and obtain comparable specimen conditions.
Can two fold-cycle numbers be ranked directly?
Not without matching method, sample preparation and endpoint. Request those details before using a cycle number to choose between materials.
Does a material pass qualify a safety shoe?
No such approval follows from this guide or a generic material result. Confirm the applicable component and whole-footwear requirements with the responsible specialist.
Should a supplier quote sheet dimensions and cutting needs with the material?
Yes, identify the supplied format and the converter’s relevant cutting or perforation requirements. A material price without that scope may not be comparable with an offer for prepared components. Confirm the actual deliverable before ranking costs.
Can a whole-shoe report establish every property of a replacement board?
Do not assume it qualifies an unidentified replacement material. Match the report’s construction and scope to the proposed component and ask the responsible specialist which changes require reassessment.
Source & applicability
Supplier literature supports this selection brief. Reference ranges do not establish an approved grade, certification or tested system performance.



