Impregnated Midsole Board
Compare impregnated nonwoven board for shoe-support applications requiring a defined stiffness and shape. Review thickness, moisture conditioning, bonding and bending requirements together.
Part of Footwear Support Substrates

Supplied brochure image. Material / use reference; confirm the offered configuration.
| Construction | Needle-punched base impregnated with a water-based adhesive system |
|---|---|
| Supply / process | Impregnation, drying, heat setting, cutting, lamination and perforation |
| Intended uses | Shoe support components selected for required stiffness and bending |
| Commercial model | Not established in the supplied literature; confirm the offered grade |
| Data status | Brochure references; not guaranteed values or batch test results |
Catalogue references are not guaranteed performance values. Confirm the offered grade, test methods and supply responsibilities in the quotation.
Product type / configuration, not an approved commercial model code. Confirm the offered identifier and specification before ordering.
Supplier literature: specification inputs
These are stated brochure ranges for preliminary review, not a guaranteed combination or an approved commercial model. Confirm the selected construction, tolerances, test method and acceptance criteria.
| Property / configuration | Literature reference |
|---|---|
| Mass | 300–900 g/m² |
| Thickness | 1.0–3.0 mm |
| Functional finishes | Discuss separately; not included as a universal property |
Material and construction
Needle-punched base impregnated with a water-based adhesive system.
The material is selected for shoe support components selected for required stiffness and bending. Define the component or system position first, then use the selection and evidence requirements on this page to prepare a comparable enquiry.
Applications and material position
Shoe support components selected for required stiffness and bending.
Define the shoe component and where stiffer support is needed. The water-based impregnation route describes the material process, not proof of a finished shoe's environmental or safety approval.
What changes the selection
Evaluate cutting, lamination, shaping and bending in the intended component. Specify moisture conditioning and the acceptance method rather than treating a brochure fold count as a universal result.
Processing and supply configuration
Impregnation, drying, heat setting, cutting, lamination and perforation.
Agree the supplied format, dimensions, tolerances, identification and packaging around the actual converting or installation sequence. Use a representative sample to confirm the proposed construction before recording it as the accepted material for the order.
Reference dimensions and configuration
The supplied literature provides the following preliminary inputs: Mass: 300–900 g/m²; Thickness: 1.0–3.0 mm; Functional finishes: Discuss separately; not included as a universal property.
Confirm the offered construction and applicable range before ordering. These entries are not a promise that every listed value can be supplied together.
Performance review and acceptance
Bending/fold, stiffness, thickness uniformity and actual downstream forming/bonding trials. Request the applicable method, specimen direction, conditioning and test scope. A published reference range is different from a measured sample result.
Keep the proposed material identifier, specimen preparation and acceptance basis with the result so that procurement can compare like with like.
Applicability and limitations
The ≥100000 fold claim and moisture/mildew claims require supporting test conditions. Work-shoe use is an application proposal, not safety certification.
Sampling and procurement brief
Include the following in your enquiry: component drawing; stiffness and thickness; moisture exposure; bonding system; perforation or cutting; bending test; intended shoe assembly.
Start with the conditions you know; mark the unknown values for review. Use the related application and product-type links on this page to refine the requirement, then send a material-specific brief. Sample approval, packing, available supply format, quantity and delivery timing are confirmed for the proposed order.
Source & applicability
Supplier literature supports this selection brief. Reference ranges do not establish an approved grade, certification or tested system performance.
Commercial grade & specification
This page describes a material family or construction type. The offered commercial model and applicable specification are confirmed for the proposed order.
Prepare the grade requirements ↗Technical documents
Review the selection checklist or request documents for the proposed grade. Public checklists are not test reports.
View selection checklist ↗ Find related documents ↗Explore related applications
Before you buy
OEM Sampling: From a Traceable Brief to an Approved Specification
An OEM nonwoven sample is useful when it represents a defined component and a decision the buyer needs to make. OEM means original equipment manufacturer. Start a development request with the finished use and converting process, then identify the candidate sample and the evidence required to move it forward. Sending an unlabelled swatch without that context rarely creates a comparable approval record.
ExploreThermo-Set or Impregnated Shoe Support: Define the Component
Choose thermo-set support fabric or impregnated board by the actual footwear component and required balance of support, flexibility and processing. The supplied footwear literature presents two material routes; it does not establish that their brochure cycle figures are directly comparable or that either route automatically meets a safety-footwear requirement.
Explore


